Scan Operation; Scan Types - Icom IC-T70A Instruction Manual

■ Scan types

Scanning automatically searches for signals and makes
it easier to locate new stations for contact or listening pur-
poses.
FULL SCAN
(p. 42)
Repeatedly scans all frequen-
144 MHz 440 MHz
band band
cies over the entire band.
Scan Scan
Some frequency ranges are not
Jump
scanned, depending on the fre-
quency coverage of the trans-
ceiver's version.
PROGRAMMED SCAN
(p. 42)
Repeatedly scans between two
Band Scan edges Band
edge xxA xxB edge
user-programmed frequencies.
Scan
Used to check for frequencies
Jump
within a specified range, such
as repeater output frequencies,
etc.
PROGRAMMED LINK SCAN
Repeatedly scans user-programmed frequencies selected
in the "P-LInk" item in the Set mode.
(pp. 42, 57)

SCAN OPERATION

SELECTED BAND SCAN
Repeatedly scans all frequen-
Band Band
edge edge
cies over the entire selected
Scan
band.
Jump
FREQUENCY/MEMORY SKIP FUNCTION
Skips unwanted frequencies or
Band Band
edge edge
channels that inconveniently
Scan
stop scanning.
SKIP SKIP
Jump
This setting can be turned ON or
OFF in the select memory write
mode. (p. 46)
The frequency skip scan function can be turned ON or OFF
in the Set mode. When this function is set to ON, the speci-
fied frequencies are skipped during VFO scan. (p. 55)
• The "P " icon appears in the VFO mode.
7
(p. 42)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
40