Memory Bank Selection - Icom IC-T70A Instruction Manual
Vhf/uhf dual band fm transceiver
Hide thumbs
Also See for IC-T70A:
- Service manual (41 pages) ,
- Instruction manual (11 pages) ,
- Product review (3 pages)
Table of Contents
Advertisement
6
MEMORY/CALL CHANNELS
■ Memory bank selection
q Push [V/M/C] to select the memory mode.
w Push [BAND] to enter the bank selection mode.
e Rotate [DIAL] to select a desired bank (A to Z), then push
[BAND].
• Only programmed banks are displayed.
• Also regular memory channel can be selected.
33
[DIAL]
Push
Regular memory channel
is displayed.
Rotate
Bank channel is displayed.
Push
r Rotate [DIAL] to select the bank channel.
• Only programmed channels are displayed.
[DIAL]
Bank channel is selected.
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-T70A and is the answer not in the manual?
Questions and answers
How to set aicom t70a to repeater
To set the Icom IC-T70A to repeater mode:
1. Set the receive frequency (repeater output frequency).
2. Set the shift direction of the transmit frequency (-DUP or +DUP).
3. Push [PTT] briefly, then push and hold [PTT] again for 1 to 2 seconds to transmit a 1750 Hz tone burst signal (if required).
4. If "OFF" appears, check the frequency offset or shift direction.
This answer is automatically generated