Radius Server - D-Link DES-3350SR User Manual

RADIUS Server

The RADIUS feature of the switch allows you to facilitate centralized user administration as well as providing protection against a
sniffing, active hacker. The Web Manager offers three windows.
Click Radius Server on the PAE Access Entity folder on the Configuration menu to open the Radius Server Authentication
Setting window:
This window displays the following information:
Parameter
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 68. Radius Server Authentication Setting window
Succession <First>
Radius Server
<0.0.0.0>
Authentic Port <0>
Accounting Port <0>
Key
Confirm Key
Accounting Method
Description
Choose the desired RADIUS server to
configure: First, Second or Third.
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP
port. The default is 1812.
Set the RADIUS account server(s) UDP port.
The default is 1813.
Set the key the same as that of the RADIUS
server.
Confirm the shared key is the same as that of
the RADIUS server.
This allows you to either Add/Modify or
Delete an entry on the table in the bottom
half of this window.
79