Configuration; Ip Address - D-Link DES-3350SR User Manual

Configuration

IP Address

Switch Information
Advanced Settings
Port Description
Port Configuration
Port Mirroring
IGMP
Spanning Tree
Forwarding Filtering
VLANs
Port Bandwidth
SNTP Settings
Port Security
QoS
LACP
Access Profile Table
IP-MAC Binding
PAE Access Entity
This section, arranged by topic, describes how to perform common configuration tasks on the DES-3350SR switch using the Web-
based Manager.
IP Address
The Switch needs to have an IP address assigned to it so that an In-Band network management system (for example, the Web
Manager or Telnet) client can find it on the network. The IP Address Settings window allows you to change the settings for the
Ethernet interface used for in-band communication.
To set the switch's IP address:
Click IP Address on the Configuration menu to open the following window:
Note: The switch's factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0 and a default gateway of 0.0.0.0.
To manually assign the switch's IP address, subnet mask, and default gateway address:
Select Manual from the Get IP From drop-down menu. Enter the appropriate IP address and subnet mask. If you want to access
the switch from a different subnet from the one it is installed on, enter the IP address of the gateway. If you will manage the switch
from the subnet on which it is installed, you can leave the default address in this field. If no VLANs have been previously
configured on the switch, you can use the default VLAN − named "default." The default VLAN contains all of the switch ports as
members. If VLANs have been previously configured on the switch, you will need to enter the VLAN name of the VLAN that
contains the port that the management station will access the switch on.
To use the BOOTP or DHCP protocols to assign the switch an IP address, subnet mask, and default gateway address:
Use the Get IP From pull-down menu to choose from Manual, BOOTP, or DHCP. This selects how the switch will be assigned an
IP address on the next reboot (or startup).
The following fields can be set:
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 1. IP Address Settings window
Section 7
20