Ip Multicast Forwarding Table; Igmp Group Table - D-Link DES-3350SR User Manual

IP Multicast Forwarding Table

The IP Multicast Forwarding Table window may be found in the Monitoring menu in the Layer 3
Feature folder. This window will show current IP multicasting information on the Switch. To search a
specific entry, enter an multicast group IP address into the Multicast Group field or a Source IP address and
click Find .

IGMP Group Table

The IGMP Group Table window may be found in the Monitoring menu in the Layer 3 Feature folder. This window will show
current IGMP group entries on the Switch. To search a specific IGMP group entry, enter an interface name into the Interface
Name field or a Multicast Group IP address and click Find.
To view the specific details for an entry, click the corresponding
This window holds the following information:
Parameter
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 10 - 25. IP Multicast Forwarding Table
Figure 10 - 26. IGMP Group Table
Defines the interface name of the reporting
Interface Name
multicast group.
The IP address of the reporting Multicast
Multicast Group
Group.
The IP address of the host member of the
Last Reporter IP
multicast group to last report being a member
of that group.
The IP Address of a selected multicast router,
IP Querier
which is designated to query host interfaces
about their multicast reception state.
The length of time, in seconds, until the entry
IP Expire
will change filter mode from exclude to include.
If the filter is in include mode, this timer will
display 0. If the filter is in exclude mode, this
timer will be counting down to zero from a pre-
calculated
implementation of IGMP.
NOTE: All timers within the preceding window can be determined using IGMP
configurations to perform the following calculation:
(Group Membership Interval x Robustness Variable) + One Query Response Interval
icon revealing the following window:
Description
figure based
146
on the users