Static Vlan Entry - D-Link DES-3350SR User Manual

D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 17. IEEE 802.1Q Tag
The EtherType and VLAN ID are inserted after the MAC source address, but before the original EtherType/Length or Logical Link
Control. Because the packet is now a bit longer than it was originally, the Cyclic Redundancy Check (CRC) must be recalculated.
Figure 7 - 18. Adding an IEEE 802.1Q Tag

Static VLAN Entry

The VLAN menu adds an entry to edit the VLAN definitions and to configure the port settings for IEEE 802.1Q VLAN support.
Go to the Configuration menu, select the VLANs folder, and click Static VLAN Entry to open the following window:
Figure 7 - 19. 802.1Q Static VLANs window
To delete an existing 802.1Q VLAN, click the corresponding click-box to the left of the VLAN you want to delete from the switch
and then click the Delete button.
To create a new 802.1Q VLAN, click the Add button:
36