Lacp Port - D-Link DES-3350SR User Manual

After setting the previous parameters, click Apply to allow your changes to be implemented. Successfully created trunk groups
will be show in the Current Link Aggregation Group Entries.

LACP Port

The DES-3350SR supports Link Aggregation Control Protocol. LACP allows you to bundle several physical ports together to form
one logical port. After the LACP negotiation, these candidates for trunking ports can be trunked as a logical port. If any one of the
connected port pairs does not have LACP capability, these two ports will stand as regular ports until the LACP negotiation is
successfully completed. Like the traditional port trunking explained earlier in this manual, the member ports of an LACP trunk
group can only be from a trunk with a peer LACP trunk group.
D-Link DES-3350SR Standalone Layer 3 Switch
Type <Static>
Active Port
Flooding Port
Figure 7 - 36. Link Aggregation Settings window
Select Static or LACP (Link Aggregation
Control Protocol).
Shows the port that
forwarding packets.
A trunking group must designate one port
to allow transmission of broadcasts and
unknown unicasts.
53
is currently