Web-Based Switch Management; Introduction; Login To Web Manager; User Accounts Management - D-Link DES-3350SR User Manual

Web-based Switch Management

Introduction

Login to Web Manager

User Accounts Management

Admin and User Privileges
Save Changes
Areas of the User Interface
Web Pages
Introduction
The DES-3350SR offers an embedded Web-based (HTML) interface allowing users to manage the switch from anywhere on the
network through a standard browser such as Netscape Navigator/Communicator or Microsoft Internet Explorer. The Web browser
acts as a universal access tool and can communicate directly with the Switch using the HTTP protocol.
The Web-based management module and the Console program (and Telnet) are different ways to access the same internal
switching software and configure it. Thus, all settings encountered in web-based management are the same as those found in the
console program.
Note: This Web-based Management Module does not accept Chinese language input (or other languages requiring 2 bytes per
character).
Login to Web Manager
The first step in getting started in using Web-based management for your Switch is to secure a browser. A Web browser is a
program that allows a person to read hypertext, for example, Opera, Netscape Navigator, or Microsoft Internet Explorer. Follow the
installation instructions for your browser.
The second step is to give the switch an IP address. This can be done manually through the console or automatically using
BOOTP/DHCP.
To begin managing your Switch simply run the browser you have installed on your computer and point it to the IP address you
have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where the numbers
123 represent the IP address of the switch.
Note: The Factory default IP address for the switch is 10.90.90.90.
In the page that opens, click on the Login to make a setup button:
This opens the management module's main page.
The switch management features available in the Web-based manager are explained below.
User Accounts Management
From the Management menu, click User Accounts and then the User Account Management window appears.
Click Add to add a user.
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 6 - 1. Login button
Figure 6 - 2. User Account Management window
Section 6
16