Port Description - D-Link DES-3350SR User Manual

Port Description

The Switch supports a port description feature where the user may name various ports on the Switch. To assign names to various
ports, click the Port Description on the Configuration menu:
D-Link DES-3350SR Standalone Layer 3 Switch
MAC Address Aging
Time <300>
IGMP Snooping
<Disabled>
GVRP Status
<Disabled>
Telnet Status
<Disabled>
Web Status <Disabled>
Link Aggregation
Algorithm <Mac
Source>
RMON Status
<Disabled>
802.1x Status
logging out. The default for this setting is 10
minutes.
The MAC Address Aging Time specifies the
length of time a learned MAC Address will
remain in the forwarding table without being
accessed (that is, how long a learned MAC
Address is allowed to remain idle). The Aging
Time can be set to any value between 10 and
1,000,000 seconds.
IGMP Snooping allows the switch to read the
Multicast Group IP address and the
corresponding MAC address from IGMP
packets that pass through the switch. It can be
enabled globally by toggling Disabled to
Enabled.
To enable GVRP on the switch globally, toggle
Disabled to Enabled.
The Switch can be accessed using Telnet.
Toggle Disabled to Enabled.
To enable the Web status, toggle Disabled to
Enabled.
The Link Aggregation Algorithm can be set to
one of the following: IP Src & Dest, IP
Destination, IP Source, Mac Src & Dest, Mac
Destination, or Mac Source.
To enable RMON capability, toggle Disabled
to Enabled.
To enable 802.1x port control access on a
global basis, toggle Disabled to Enabled.
23