802.1P Default Priority - D-Link DES-3350SR User Manual

802.1p Default Priority

The switch allows the assignment of a default 802.1p priority to each port on the switch.
Click 802.1p default_priority in the QoS folder on the Configuration menu:
D-Link DES-3350SR Standalone Layer 3 Switch
Multicast Storm
<Disabled>
Destination Lookup
Fail <Disabled>
Threshold <128>
Switch's reaction to Broadcast storms,
triggered at the threshold set in the last field.
This field can be toggled between Enabled
and Disabled using the drop-down menu.
This enables or disables, globally, the
Switch's reaction to Multicast storms,
triggered at the threshold set above.
This field can be toggled between Enabled
and Disabled using the drop-down menu.
This enables or disables, globally, the
Switch's reaction to Destination Address
Unknown storms, triggered at the threshold
set above.
This is the value in units of packets per
second, beyond which the ingress port for
that block discards packets. Each port
contains three counters, one each for
Broadcast, Multicast, and Destination
Lookup Fail packets. The counters are
cleared every second. If the counter for a
particular type of packet exceeds this
threshold within one second, then further
packets of that type will be dropped.
47