Management; Security Ip; User Accounts - D-Link DES-3350SR User Manual

Management

Security IP

User Accounts

Secure Shell (SSH)
SNMP
This section, arranged by topic, describes how to manage the DES-3350SR via the Management menu.
Security IP
Some settings must be entered to allow the switch to be managed from an SNMP-based Network Management System such as
SNMP v1 or to be able to access the Switch using the Telnet protocol or the Web Manager.
To setup the switch for remote management:
Click the Security IP link in the Management menu:
Management stations are computers on the network that will be used to manage the switch. You can limit the number of possible
management stations by entering up to eight IP addresses. If the eight IP Address fields contain all zeros ("0"), then any station
with any IP address can access the switch to manage and configure it. If there is one or more IP addresses entered in the IP Address
fields, then only stations with the IP addresses entered will be allowed to access the switch to manage or configure it.
User Accounts
From the Management menu, click User Accounts and then the User Account Management window appears.
Click Add to add a user.
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 8 - 1. Security IP Management window
Figure 8 - 2. User Account Management window
Section 8
80