Igmp Interface Settings - D-Link DES-3350SR User Manual

D-Link DES-3350SR Standalone Layer 3 Switch
Figure 9 - 42. IGMP State Transitions

IGMP Interface Settings

The Internet Group Multicasting Protocol (IGMP) can be configured on the Switch on a per-IP interface basis. Click
Configuration > Layer 3 IP Networking > IP Multicast Routing Protocol > IGMP Interface Settings to view the window
shown below. Each IP interface configured on the Switch is displayed in the below IGMP Interface Settings dialog box. To
configure IGMP for a particular interface, click the corresponding hyperlink for that IP interface. This will open another IGMP
Interface Settings Edit window:
Figure 9 - 43. IGMP Interface Table
Figure 9 - 44. IGMP Interface Configuration window
This window allows the configuration of IGMP for each IP interface configured on the Switch. IGMP can be configured as
Version 1 or 2 by toggling the Version field using the pull-down menu. The length of time between queries can be varied by
entering a value between 1 and 31,744 seconds in the Query Interval field. The maximum length of time between the receipt of a
query and the sending of an IGMP response report can be varied by entering a value in the Max Response Time field.
124