D-Link DES-3350SR User Manual page 62

The following fields can be set:
Parameter
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 34. Port Link Aggregation Settings (Add) window
Figure 7 - 35. Port Link Aggregation Settings (Modify) window
Description
Group ID(1-6)
State <Disabled>
Master Port <Port 1>
Member Port
Allows the entry of a number used to
identify the link aggregation group −
when adding a new group. Displays the
Group ID of the currently selected link
aggregation group − when editing and
existing entry.
This field can be toggled between
Enabled and Disabled. This is used to
turn a link aggregation group on or off.
This is useful for diagnostics, to quickly
isolate a bandwidth intensive network
device, or to have an absolute backup
link aggregation group that is not under
automatic control.
The Master port of link aggregation
group.
Allows the specification of the ports that
will make up the link aggregation group.
52