Authentication Process - D-Link DES-3350SR User Manual

Authentication Process

Utilizing the three roles stated above, the 802.1x protocol provides a stable and secure way of authorizing and authenticating users
attempting to access the network. Only EAPOL traffic is allowed to pass through the specified port before a successful
authentication is made. This port is "locked" until the point when a Client with the correct username and password (and MAC
address if 802.1x is enabled by MAC address) is granted access and therefore successfully "unlocks" the port. Once unlocked,
normal traffic is allowed to pass through the port. The following figure displays a more detailed explanation of how the
authentication process is completed between the three roles stated above.
The D-Link implementation of 802.1x allows network administrators to choose between two types of Access Control used on the
Switch, which are:
1. Port-Based Access Control – This method requires only one user to be authenticated per port by a remote RADIUS server
to allow the remaining users on the same port access to the network.
2. MAC-Based Access Control – Using this method, the Switch will automatically learn up to three MAC addresses by port
and set them in a list. Each MAC address must be authenticated by the Switch using a remote RADIUS server before being
allowed access to the Network.
Understanding 802.1x Port-based and MAC-based Network Access Control
The original intent behind the development of 802.1X was to leverage the characteristics of point-to-point in LANs. As any single
LAN segment in such infrastructures has no more than two devices attached to it, one of which is a Bridge Port. The Bridge Port
detects events that indicate the attachment of an active device at the remote end of the link, or an active device becoming inactive.
These events can be used to control the authorization state of the Port and initiate the process of authenticating the attached device
if the Port is unauthorized. This is the Port-Based Network Access Control.
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 58. The 802.1x Authentication Process
71