Size; Packet Size - D-Link DES-3350SR User Manual

Size

Packet Size

The Web Manager allows packets received by the Switch, arranged in six groups, to be viewed as either a line graph or a table.
Two windows are offered.
D-Link DES-3350SR Standalone Layer 3 Switch
Time Interval [1s ]
Record Number [200]
ExDefer
LateColl
Show/Hide
Clear
View Table
View Line Chart
Figure 10 - 13. Rx Size Analysis window (line graph)
Select the desired setting between 1s and 60s,
where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be
polled between 20 and 200. The default value
is 20.
Counts the number of frames for which the
first transmission attempt on a particular
interface was delayed because the medium
was busy.
Counts the number of times that a collision is
detected later than 512 bit-times into the
transmission of a packet.
Check whether or not to display ExDefer,
LateColl, ExColl, SingColl, and Coll errors.
Clicking this button clears all statistics
counters on this window.
Clicking this button instructs the Switch to
display a table rather than a line graph.
Clicking this button instructs the Switch to
display a line graph rather than a table.
138