Lacp; Link Aggregation - D-Link DES-3350SR User Manual

D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 31. Traffic Segmentation Setting window
Enter a source port number in the first field and the range of the ports that you want to segment in the second field. For example, if
you enter "5" in the first field and "5-8" in the second field, packets from port 5 will only be forwarded to ports 5 to 8. Packets to
port 9, then, will be dropped. Click Apply to let your changes take effect.

LACP

Link Aggregation

Link aggregation is used to combine a number of ports together to make a single high-bandwidth data pipeline. The participating
parts are called members of a link aggregation group, with one port designated as the master port of the group. Since all members
of the link aggregation group must be configured to operate in the same manner, the configuration of the master port is applied to
all members of the link aggregation group. Thus, when configuring the ports in a link aggregation group, you only need to
configure the master port.
The DES-3350SR supports link aggregation groups, which may include from two to eight switch ports each, except for a Gigabit
link aggregation group which consists of the two (optional) Gigabit Ethernet ports of the front panel.
50