Layer 3 Ip Networking; Ip Interface Settings - D-Link DES-3350SR User Manual

Layer 3 IP Networking

IP Interface Settings

Layer 3 Global Settings
MD5 Key Table Settings
Route Redistribution Settings
Static/Default Route Settings
Static ARP Settings
RIP
OSPF
DHCP/Bootp Relay
DNS Relay
IP Multicast Routing Protocol
This section, arranged by topic, describes how to perform common configuration tasks at the OSI Layer 3 level on the DES-
3350SR switch using the Web-based Manager.
IP Interface Settings
Each VLAN must be configured prior to setting up the VLAN's corresponding IP interface.
An example is presented below:
In this case, six IP interfaces are required, so a CIDR notation of 10.32.0.0/11 (or a 11-bit) addressing scheme will work. This
addressing scheme will give a subnet mask of 11111111.11100000.00000000.00000000 (binary) or 255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example would give 6 network addresses and 6 subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address for an IP interface on the
switch.
For this example, we have chosen the next IP address above the network address for the IP interface's IP Address:
The six IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered into the
IP Interface Settings window.
To setup IP Interfaces on the Switch:
D-Link DES-3350SR Standalone Layer 3 Switch
VLAN Name VID
System (default) 1
Engineer 2
Marketing 3
Finance 4
Sales 5
Backbone 6
Table 9 - 1. VLAN Example - Assigned Ports
VLAN Name VID
System (default) 1
Engineer 2
Marketing 3
Finance 4
Sales 5
Backbone 6
Table 9 - 2. VLAN Example - Assigned IP Interfaces
Section 9
Switch Ports
5, 6, 7, 8, 21, 22, 23, 24
9, 10, 11, 12
13, 14, 15, 16
17, 18, 19, 20
1, 2, 3, 4
25, 26
Network Number IP Address
10.32.0.0 10.32.0.1
10.64.0.0 10.64.0.1
10.96.0.0 10.96.0.1
10.128.0.0 10.128.0.1
10.160.0.0 10.160.0.1
10.192.0.0 10.192.0.1
92