Multicast Forwarding - D-Link DES-3350SR User Manual

Multicast Forwarding

Multicast MAC addresses can be statically entered into the switch's MAC Address Forwarding Table. These addresses will never
age out.
To enter a Multicast MAC address into the switch's forwarding table, click on the Forwarding Filtering folder on the
Configuration menu and then click Multicast Forwarding:
To add a new multicast MAC address to the Switch's forwarding table, click the Add button:
The following fields can be set:
Parameter
D-Link DES-3350SR Standalone Layer 3 Switch
Allowed to Go Port
Figure 7 - 14. Static Multicast Forwarding Settings window
Figure 7 - 15. Setup Static Multicast Forwarding Table window
VID
Multicast MAC Address
Port
None
Egress
switch's static forwarding table when adding a
new entry. Displays the currently selected
MAC address when editing.
Allows the selection of the port number on
which the MAC address entered above resides.
Description
Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member
of.
Allows the entry of the multicast MAC
address of an end station that will be entered
into the switch's static forwarding table.
Select the port number on which the MAC
address entered above resides.
Specifies the port as being none.
Specifies the port as being a source of
multicast packets originating from the MAC
address specified above.
34