Static Vlan Entry - D-Link DGS-3048 - Switch Product Manual

Parameter
VLAN ID
VLAN Name
Ports
Status

Static VLAN Entry

In L2 Features folder, open the VLANs folder and click the Static VLAN Entry link to open the following window:
The first 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete
an existing 802.1Q VLAN, click the corresponding
Parameter
VLAN ID
VLAN Name
Ports
To create a new 802.1Q VLAN, click the Add button in the first 802.1Q Static VLANs window. A new window will
appear, as shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the
table below for a description of the parameters in the new window.
DGS-3048 Gigabit Ethernet Switch Manual
Figure 8- 4. VLAN Status Window
Description
Displays the VLAN ID of an existing VLAN in the Modify window. VLANs can be
identified by either the VID or the VLAN name.
Displays the entry of a name for the new VLAN.
Displays the ports included in the port.
Displays VLAN's status.
Figure 8- 5. first 802.1Q Static VLANs window
Description
Displays the VLAN ID of an existing VLAN in the Modify window. VLANs can be
identified by either the VID or the VLAN name.
Displays the VLAN ID.
Specifies the ports included in the VLAN.
button under the Delete heading.
50