Vlan And Trunk Groups; Static Vlan Entry - D-Link xStack DES-3526DC User Manual

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

VLAN and Trunk Groups

The members of a trunk group have the same VLAN setting. Any VLAN setting on the members of a trunk group will apply to
the other member ports.
NOTE: In order to use VLAN segmentation in conjunction with port trunk groups, you can first set
the port trunk group(s), and then you may configure VLAN settings. If you wish to change the port
trunk grouping with VLANs already in place, you will not need to reconfigure the VLAN settings after
changing the port trunk group settings. VLAN settings will automatically change in conjunction with
the change of the port trunk group settings.

Static VLAN Entry

In the Configuration folder, open the VLAN folder and click the Static VLAN Entry link to open the following window:
The 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an existing
802.1Q VLAN, click the corresponding X button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs window. A new window will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new window.
To return to the Current 802.1Q Static VLANs Entries window, click the
existing 802.1Q VLAN entry, click the Modify button of the corresponding entry you wish to modify. A new menu will appear to
configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a description of the
parameters in the new menu.
Figure 6- 40. Current 802.1Q Static VLANs Entries window
Figure 6- 41. 802.1Q Static VLAN window - Add
Show All Static VLAN Entries
64
link. To change an