Borderless Printng Not Possible. Paper Stretched Or Shrank; Before Borderless Printing, Move The Blue Platen Switch; Blue Platen Switch Is Dirty; Move The Blue Platen Switch No.xx To The Right. (Xx Represents A Number) - Canon ipf8300 User Manual

Error Message >
The temperature or humidity where
the printer is installed is out of the
acceptable range for operation.

Borderless printng not possible. Paper stretched or shrank.

The loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or narrower than the supported
width for borderless printing.

Before borderless printing, move the blue platen switch.

The blue Switch on the platen was set to the side
opposite ● when a borderless print job was re-
ceived.

Blue platen switch is dirty.

The blue Switch on the platen is dirty.
13

Move the blue platen switch No.xx to the right. (xx represents a number)

The printer has detected that the blue Switch on the
platen needed in maintenance during printing is set
away from the ● mark.
1098

Cannot adjust paper feed.

The Printhead nozzles are clogged.
Borderless printng not possible. Paper stretched or shrank.
Downloaded from ManualsPrinter.com Manuals
Messages regarding printing or adjustment
Cause
(See "Types of Paper.")
Press ▲ or ▼ to select Continue, and then press the OK button to continue
with color calibration. However, note that correct adjustment may not be possi-
ble.
Cause
Cause
Cause
Cause
Cause
Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
>
Corrective Action
→P.768
Press the OK button to stop printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on en-
vironmental conditions for various paper, see the Pa-
per Reference Guide.
(See "Types of Paper.")
Before borderless printing, set the blue Switch on the platen to
the ● side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Set blue platen Switch of the indicated number toward the ●
side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
Corrective Action
→P.768
Corrective Action
→P.1063
→P.1026
Corrective Action
→P.1063
iPF8300