Canon imagePROGRAF iPF8400S User Manual page 529

iPF8400S
10
Print the job.
The printer stops advancing the paper after printing.
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it can be
printed without the margin of about 10 cm being created at the paper leading edge.
Note
11
Press the Feed button.
Roll paper is fed to the specified cut position and then auto-
matically stopped.
12
Cut the roll paper manually with scissors or the like.
• Cut at the dotted line printed on the paper. If you cut on the printer side of the dotted line, the paper leading edge
may rub against the printhead and may deviate from the paper retainer.
Important
13
Press the OK button.
After the roll is rewound, it stops automatically.
User's Guide
Specifying the Cutting Method for Rolls
529