Menu Settings
Adjust
Calibra-
Printer
tion
Mainte-
Head Cleaning
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head In-
fo
Repl. S. Cleaner
Change Cutter
Interface
EOP Timer
Setup
TCP/IP
646
Setting Item
Use Adj. Value
Set Exec. Guide
Return Defaults
Printhead L
Printhead R
IPv4
IPv4 Mode
Protocol
DHCP
BOOTP
RARP
IPv4 Set-
IP Address
tings
Subnet Mask
Default G/W
DNS Set-
DNS Dync update
tings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
Description, Instructions
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Clear the color calibration adjustment value and the execution
log.
Clean the Printhead. (See "Cleaning the Print-
head.")
P.885
➔
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Execute when replacing the Printhead. Follow the instructions
displayed to complete the required procedure. (See "Replacing
the Printhead.")
P.886
➔
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Execute when replacing the Maintenance Cartridge. Follow the
instructions displayed to complete the required procedure.
(See "Replacing the Maintenance Cartridge.")
Indicates information about the printhead.
Replace the Shaft Cleaner. Follow the instructions displayed to
complete the required procedure. (See "Replacing the Mainte-
nance Cartridge.")
P.898
➔
Replace the Cutter Unit. Follow the instructions displayed to
complete the required procedure. (See "Replacing the Cutter
Unit.")
P.894
➔
Once you replace the Cutter Unit, you can also reset the cut
counter.
Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Specify the protocol used to configure the IP address automati-
cally.
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated automati-
cally.
Specify the DNS server address.
Specify the DNS host name.
iPF8400S
P.898
➔
User's Guide