Canon imagePROGRAF iPF8400S User Manual page 912

Preparing to Transfer the Printer
Remove paper
1
Remove the paper.
Rolls (See "Removing the Roll from the Printer.")
•
Sheets (See "Removing Sheets.")
•
Access the Prep.MovePrinter menu
1
If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, replace
the Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.")
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
5
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
6
Press ▲ or ▼ to select Execute, and then press the OK button to display the confirmation screen.
7
Press ▲ or ▼ to select Yes, and then press the OK button.
The printer is now prepared for transfer.
Level 1
•
Once preparations are finished, a message on the Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to remove the ink tanks.
(See "Pack the printer.")
Level 2 and Level 3
•
When the preparation is finished, instructions are displayed on the Display Screen.
Remove the ink tanks before packing the printer.
(See "Removing Ink Tanks.")
Important
912
).
If the Tab Selection screen is not displayed, press the Menu button.
P.915
➔
P.913
➔
• If consumables must be replaced, the message "Consumables must be replaced. Call for service." is shown on
the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact
your Canon dealer for assistance.
P.517
➔
P.539
➔
P.898
➔
iPF8400S
User's Guide