Scheduling Color Check - Canon imagePROGRAF iPF8400S User Manual

Scheduling Color Check

Scheduling Color Check

Scheduling Color Check
You can configure a schedule to automatically perform color check at the specified dates and times.
Once configured, the color check is executed on the paper that is loaded at the specified date and time.
You can also configure whether or not to execute color calibration if the result of the color check exceeds the color
check threshold value.
The color check is not executed at the designated date and time if the printer is turned off.
•
Important • If the schedule settings are configured while the printer is in sleep mode, the schedule settings are applied when the printer
recovers from sleep mode. The color check will not be executed by the configured schedule unless the printer recovers from
sleep mode at least once.
• This step can be executed when a printer that has a spectrophotometer unit installed is selected.
Note
1
Open the Color Measurement sheet.
2
Select Schedule Settings from the Tools menu.
3
In the Schedule Settings dialog box, configure the settings
such as the date and time to execute the color check and click
the OK button.
Scheduling
Schedule
866
Pattern Size
Setting Item
Select this check box to execute a color check at the date and time specified in Schedule.
Sets the date and time to execute the color check.
If When Printer Switched ON is selected, a color check is executed when the printer is turned
on.
To increase the precision of the color check, we recommend that you configure the same set-
ting as when Auto Adjust (High Precision) was executed in color calibration.
Details
iPF8400S
User's Guide