Canon imagePROGRAF iPF8400S User Manual page 915

iPF8400S
7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the power cord, interface cable, and Media Take-up Unit Power Inlet.
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer it in
that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this procedure
Important
again.
2
Open the Top Cover and lift the Ejection Guide.
3
Remove the four ejection supports and lower the Ejec-
tion Guide.
User's Guide
Preparing to Transfer the Printer
915