Borderless Printing By Resizing Originals To Match The Paper Size (Windows) - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
• Fit Paper Size
Enlarge or reduce the original to match the size of the paper you are using.
• The printer driver automatically enlarges originals 3 mm (0.12 in) past the dimensions of the paper on each side. The 3
mm portion beyond the edge on each side is not printed.
Note
For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to
the following topics, as appropriate for your computer and operating system.

Borderless Printing by Resizing Originals to Match the Paper Size (Windows)

•
• To perform borderless printing with resizing to fit the paper size on Mac OS, select borderless in Paper Size and
use Scale to fit paper size in the Paper Handling panel provided by the OS.
Note
For more information, see the Mac OS User Manual.
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Roll Paper Options dialog box. In this
Important
case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the upper
and lower bands with scissors.
Document: Any type
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
•
User's Guide
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
P.89
➔
89