Adjustment Pattern Setting Dialog Box - Canon imagePROGRAF iPF8400S User Manual

iPF8400S

Adjustment pattern setting dialog box

Adjustment pattern setting dialog box

Displays the adjustment pattern by taking images with the adjustment values varying up and down in steps from the
baseline adjustment values in the Color Settings sheet (color or monochrome). This allows you to print the adjustment
pattern and select your preferred adjustment values while comparing the images.
• Preview Area
This area allows you to view adjustment pattern images side-by-side to check the state when changes to adjust-
ment values are applied.
The adjustment values of the image enclosed in the blue frame in the center are used as the base values, with
images arranged around this with the adjustment values varying in steps up and down from these base values. If
you click any of the images, the adjustment pattern is redisplayed with the adjustment values from that image as
the base values.
The adjustment values are displayed at the top of each image. If both the Horizontal Axis and Vertical Axis are
configured, the adjustment value for the Horizontal Axis is displayed on the right and the adjustment value for the
Vertical Axis is displayed on the left. If the image is so small that the adjustment values cannot be displayed, you
can check the adjustment values by displaying the tool tip.
• For images where the adjustment values are out of range, an adjustment pattern is not displayed and the message Out
of Range is displayed instead.
Note
• Paper Source
Selects the paper feed method for the paper to print the adjustment pattern on. You can split the usage between
printing adjustment patterns on cut paper (manual feed) and printing work pieces on roll paper.
• Use Paper Size
Selects the paper size to print the adjustment pattern on.
The adjustment pattern is printed so that it fits into the selected paper size.
If the image size is large and Dimensions is selected in Pattern Size, the pattern display might not fit within the vertical
•
direction of the paper size. In this case, select Auto in Pattern Size.
Note
• The printed paper size is displayed in Paper Size.
• Paper Size
Since the length in the vertical direction may differ between the Use Paper Size and actual printed material, this
displays the actual output paper size.
User's Guide
Adjustment pattern setting dialog box
259