Making The Original Orientation Match The Paper Orientation (Mac Os) - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
12
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Making the Original Orientation Match the Paper Orientation (Mac OS)

Making the Original Orientation Match the Paper Orientation (Mac OS)

This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the
following example.
Document: An original in landscape orientation
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
•
1
B
This sets the Format for and
The configuration method varies depending on the OS and
•
application software you are using.
Note
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print from
the application software menu.
2
Select the printer in the
3
F
In the Paper Size list, click the size of the original. In this case, click ISO A4.
4
G
In Orientation, click the icon of the document in landscape orientation.
5
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
User's Guide
C
Paper Size.
A
Printer list.
Making the Original Orientation Match the Paper Orientation (Mac OS)
P.164
➔
F
OK to close the dialog box, and
153