Printing On Non-Standard Paper Sizes; Printing On Non-Standard Paper Sizes (Windows) - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
4
Make your selection in the
5
Make your selection in the
6
Access the Page Setup pane.
7
Select and click a roll paper in the
8
Select the paper width of the roll loaded in the printer for
ted.
9
C
In Page Size, make sure 100*500 is displayed, as registered in Page Setup.
10
D
Select the Enlarged/Reduced Printing check box.
11
F
Click Fit Roll Paper Width.
12
Confirm the print settings, and click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Printing on Non-Standard Paper Sizes

Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set up
to 18.0 m.
• In Windows, although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m. The setting of
Custom Size is disabled when you exit the application software.
Note
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as appropriate for your
computer and operating system.

Printing on Non-Standard Paper Sizes (Windows)

•
Printing on Non-Standard Paper Sizes (Mac OS)
•
Printing on Non-Standard Paper Sizes (Windows) Printing on Non-Standard Paper Sizes (Windows)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Paper Size.
User's Guide
E
Print Target list.
F
Print Quality list.
A
Paper Source list.
M
Print to start printing.
P.105
➔
P.109
➔
Printing on Non-Standard Paper Sizes
B
Roll Width. In this case, 16 in. (406.4mm) is selec-
P.349
➔
105