Canon imagePROGRAF iPF8400S User Manual page 781

iPF8400S
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
When VacuumStrngth is set to Automatic, the setting value selected for
•
the previous print job is displayed (to the right of Automatic ) once you
Note
select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or the paper
is replaced.
5
Press ▲ or ▼ to select VacuumStrngth, and then press the OK button.
6
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
User's Guide
Adjusting the Vacuum Strength
781