Canon imagePROGRAF iPF8400S User Manual page 527

iPF8400S
9
Press the Feed button.
Roll paper is fed to the specified cut position and then auto-
matically stopped.
10
Cut the roll paper manually with scissors or the like.
11
Press the OK button.
After the roll is rewound, it stops automatically.
Manual (for paper of which the leading edge rubs the printhead)
• Once the following step has been performed, the procedure can be started from step 10 the next time.
Note
• Printing the second and subsequent times
• Printing after replacing with the same type of paper
User's Guide
Specifying the Cutting Method for Rolls
527