Canon imagePROGRAF iPF8400S User Manual page 893

iPF8400S
13
Push the Carriage Cover down toward the front.
14
Close the Top Cover.
Ink now fills the system. It takes about 13 minutes for
ink to fill the system.
• While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak out.
Important
• The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute Initial adjustmt in Head Posi. Adj. in the Control Panel menu.
Note
(See "Adjustment When Installing the Printhead.")
15
Feed paper by following the instructions on the Display Screen.
After the paper has advanced, Initial adjustmt in Head Posi. Adj. is executed automatically.
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal
•
Printhead height before aligning the printhead.
Note
(See "Enhancing Printing Quality.")
User's Guide
P.771
➔
P.766
➔
Replacing the Printhead
893