Canon imagePROGRAF iPF8400S User Manual page 612

Add Custom Paper
11
The Test Print Settings dialog box is displayed.
Select the print priority and print quality of the test print
using Print Priority and Print Quality.
Set the level to test print using Maximum ink usage
and the image to use using Image used in test print,
and then click the Start Print button.
12
Determine and set the ink level that is thought to give the
best visual test print results with no bleeding or scraping of
ink.
•
Note •
•
•
612
•
Select the optimal ink level by referring to the help.
If you cannot obtain sufficiently high quality printing no matter which maximum ink usage level you select, use the
Step 1: Select the standard paper dialog box to change the paper that is the basis of the custom paper to another
paper.
Because this settings imposes an upper limit on the amount of ink used during printing, the printing result might not
change even if the level is changed depending on the image.
The color tone cannot be configured using the Media Configuration Tool. Although the color tone may change when
the maximum ink usage is changed, at this point you should select the optimal level by only focusing on bleeding
and scraping of ink. If the color tone needs to be adjusted, provide an ICC color profile that matches the paper you
are using, and select that ICC color profile in your software. For details on how to specify the ICC profile in the
printer driver, see "Matching Sheet ."
Depending on the maximum ink usage setting, some of the print qualities in the printer driver may become unselect-
able.
P.177
➔
iPF8400S
User's Guide