Table of Contents
Advertisement
The monitor can also get the 1%-stepwise safety
marker displayed in the range of 80-99% with respect
to the line marker area.
The safety markers over the effective screen can be
equally preset 1% by 1% in the range of 80-99%.
The monitor also comes standard abundantly with
five-part split and ten-part split crosshatch markers
useful for location alignment.
(7) User marker display function
Up to 10 different user markers, such as line and
box markers, are presettable pixel by pixel to your
desired positions and sizes. The line and box drawing
settings can be easily made with not just the switch
but also the USB mouse. Resulting complicated data
may also be saved on a USB memory so that the data
can be copied to another monitor or stored in a PC.
This function is optimum for positioning in editing
the layout and its display for various types of
information such as teleshopping.
* Patent pending
(8) Shadow function
The shadow function is to shade the area other
than a 4:3 (16:9 mode), 13:9, 14:9, 15:9 or 16:9 (4:3
mode) marker area on images. The shadow contrast
can be set at 0%, 20%, 40% or 60% on the MENU.
The use of this function allows you to instantly
visualize the image area when converting images
with an aspect ratio of 16:9 to those with an aspect
ratio of 4:3 or vice versa.
This shadow function can be turned on/off by
remote control and prompt switching is therefore
realized.
(9) Various built-in test signals
The monitor is standard equipped with color bar
signal, grayscale signal with pluge pattern, and
window signal. Various adjustments can therefore be
made on the monitor alone.
(10) Time code display function
It is possible to display the time code (VITC)
multiplexed into SDI signal on the screen.
The display comes in two sizes, large and small,
and its brightness in three levels.
(11)
Waveform monitor/Vector scope display functions
Waveform monitor of brightness signal can be
displayed. The display comes in two sizes, NORMAL
and SMALL, and its brightness in three levels. The
waveform can also be displayed in any of three
selectable positions and in one of two colors: GREEN
and WHITE. The vector scope can also be readily
displayed.
(12) 2-picture split display function
A previously captured still image and a currently
incoming moving image are displayed split onscreen.
Just one monitor serves to compare the pictures
from two cameras at once on its screen.
(13) Dot-by-dot display function
All the picture elements of an input signal are
displayed 1:1 according to the pixels of the LCD panel
without scaling the incoming signal (enlarging or
reducing the input signal according to the LCD
pixels).
This function is useful in checking transmitted
input signals for pixel defects, camera CCD's
scratches, etc.
Only the 1080i/p signal is displayed in 1:1 in the
normal scanning status.
(14) External memory function
Various data (MENU settings, PRESET data, etc.)
can be saved on a USB memory and copied to a PC, on
which the data is ready to manage. Such data may
also be copied to another monitor.
* Keep in mind that when copying the PRESET
data to another monitor, they may be different from
monitor to monitor.
(15) USB mouse control
By connecting a commercially available USB
mouse to the USB terminal of this monitor, it is
possible to perform various adjustments including the
"MENU setting," "PRESET data setting," "Input
signal switching," and the "Front switch setting"
through the use of a mouse. Remote operation of the
monitor at a distant position is possible by using a
commercially available wireless mouse.
Use of the scroll wheel function of the mouse has
significantly improved the user-friendliness of the
monitor for making adjustment of various data such
as color temperature.
(16) Downmix function
Among the embedded audio 8 channels, 5.1
channel surround audio channel (Lm, Rm, C, Ls, and
Rs) has been selected for the stereophonic audio
function at the downmix mixing ratio specified by
ARIB and ISO/IEC.
The downmix audio signals can be easily output
through the speakers built in the monitor or a
headphone, or through the analog output (EA-240A
or D3G-240A packaged).
- 2 -
Advertisement
Table of Contents
