Description Of Menu 4 Functions - Ikegami HLM-2450WB Operation Manual

4-6．Description of MENU 4 Functions
ＭＥＮＵ４（ＳＣＲＥＥＮ ＣＡＰＴＵＲＥ）
１．ＳＣＲ ＣＡＰＴＵＲＥ
２．→ＡＲＥＡ
ＳＥＴ→ ＥＸＩＴ→
ＥＮＴ
① Executing the 2-picture split mode
・Used to execute this mode to take in the still
image of an input signal and compare it with
other inputs.
1. With "EXECUTE" flashing in magenta,
press the ENT switch.
2. The display changes as shown below. Press
the ENT switch again to take in the image.
Ｓ Ｅ Ｔ→ Ｅ Ｘ Ｉ Ｔ→
ＥＮＴ
E S C
3. Switch the input and compare its image with
the taken-in still image. To take in another
image or to quit the 2-picture split mode, press
the ESC switch.
Still image taken in Input signal
取り込んだ静止画
Ｅ Ｘ Ｉ Ｔ→
E S C
* The 2-picture split mode is operative with
sameformat signals. If different-format signals
are input, the images cannot be properly
displayed.
* With ASPECT set at [16:9], the SDTV signal is
converted to the [4:3].
ＥＸＥＣＵＴＥ
ＦＵＬＬ
E S C
入力信号
① Executing the 2-picture split mode
② Setting of 2-picture split display area
② Setting of 2-picture split display area
・Used to set the display area in the 2-picture split
mode.
・FULL
・4:3
area
・Default setting is FULL.
* This function is operative with HDTV-format
input signals only.
HDTV < FULL >
- -
20
：Full image displayed
：Image displayed in the central 4:3
HDTV < 4:3 >