Table of Contents
Advertisement
MENU7
(MARKER)
MENU8
(PARALLEL REMOTE)
MENU9
(PC SETUP)
MENU10
(RESET)
MENU11
(INFORMATION)
MENU12
(USB MEMORY)
Setting the 5.1 channel surround downmix
8.DOWNMIX SETTING
Setting the downmix formats (ARIB/ISO IEC)
9.→FORMAT
Setting the Ls/Rs level (-3dB/-6dB/-9dB/OFF)
10.→Ls/Rs LEVEL
Setting the embedded audio channel assignment of speaker (Lm)
11.→INPUT OF Lm
Setting the embedded audio channel assignment of speaker (Rm)
12.→INPUT OF Rm
Setting the embedded audio channel assignment of speaker (C)
13.→INPUT OF C
Setting the embedded audio channel assignment of speaker (Ls)
14.→INPUT OF Ls
Setting the embedded audio channel assignment of speaker (Rs)
15.→INPUT OF Rs
1.MARKER (16:9)
Setting the type of marker displayed at 16:9 aspect ratio
2.→SAFRTY AREA
Setting the 16:9 safety marker area (80-99% (1% increments))
3.→ASPECT
Setting the type of aspect marker at 16:9 display
Setting the safety marker (80-99% (1% increments)) in aspect
4.→AREA IN ASPECT
marker area
5.MARKER (4:3)
Setting the type of marker displayed at 4:3 aspect ratio
6.→SAFETY AREA
Setting the 4:3 safety marker (80-99% (1% increments))
7.→ASPECT
Setting the type of aspect marker at 4:3 display
8.ASP MARKER MODE
Setting the aspect marker display mode
9.→SHADOW LEVEL
Setting the shadow contrast level with shadow on screen
10.CENTER MARKER
Setting the center cross marker ON/OFF
11.MARKER LEVEL
Setting the marker display level
12.MARKER COLOR
Setting the marker display color
13.USER MARKER
Setting the user marker display ON/OFF
14.→SETTING
Executing the user marker for the drawing setting menu
1.PIN FUNCTION
Setting the parallel remote pin function
1.DVI SETUP
Setting the PC signal with DVI input
2.→EXPANSION
Setting the display size for PC signal with DVI input
3.COMP SETUP
Setting the CM-175 system
4.→INPUT SELECT
Setting the analog PC/COMPONENT input selection
5.→EXPANSION
Setting the analog PC input display size
6.→XGA/WXGA
Setting the analog PC input with XGA or WXGA input
7.AUTO ADJUST
Executing the PC input automatic adjustment
8.→H POSITION
Adjusting the PC input horizontal screen position
Adjusting the PC input vertical screen position
9.→V POSITION
Adjusting the PC input clock
10.→CLOCK
Adjusting the PC input phase
11.→PHASE
(The dashed-line-boxed items are effective with the CM-175 mounted.)
1.LOAD FACTORY
Executing the initialization to the factory settings
2.RESET FILE
Selecting the preset files to be initialized
Displaying the MPU version
1.MPU VERSION
Displaying the FPGA version
2.FPGA VERSION
Displaying the operating hours
3.WORKING TIME
Displaying the optional module mounted
4.OPTION MODULE
<MONITOR→USB MEMORY> ：
Setting the files date /time to write on USB memory
1.SETTING DATE＆TIME
Setting the files year/month/day to write on USB memory
2.→DATE(Y/M/D)
Setting the files hour/minute to write on USB memory
3.→TIME(H:M)
4.WRITE TO MEM
Executing to write on USB memory
<USB MEMORY→MONITOR>：
Setting the data contents to be downloaded from USB
5.CONTENTS TO
memory to monitor
DOWNLOAD
□MENU&SW
Date in the menu-based and switch-preset status
□USER MARKER
Data of user markers
□PRESET
Various preset data
Downloading from USB memory to monitor
6.DOWNLOAD
- -
11
Data write menu from monitor to USB memory
Download menu from USB memory to monitor
Advertisement
Table of Contents
