Outline; Features - Ikegami HLM-2450WB Operation Manual

HLM-2450WB FULL HD Multi-Format LCD Color Monitor
1．Outline
1-1．Outline
This 24-inch type HDTV/SDTV multi-format color
monitor employs a full high-definition liquid crystal
panel for reduction in thickness, weight and power
consumption, and is designed for use in various
spaces such as sub-control rooms, editing rooms,
monitor wall, transmission control desks, and outside
broadcast vans.
This monitor is compatible with the functions and
operation of the HTM/TM series CRT monitors, so
that it can realize the functions necessary for a
broadcasting service monitor with conventional
operation.
1-2．Features
(1) High performance liquid crystal panel
Employed is 10bit liquid crystal panel with a high
resolution of Wide-UXGA (1920 x 1200 dots) that is
excellent in basic performances such as high
brightness, high contrast, wide viewing angle, quick
response and good color reproducibility. Accordingly,
both HDTV and PC signals can be displayed on
realistic images without having to resizing the input
pixels. This monitor is thus best suited for non-linear
editing and similar applications.
(2) Multi-format
The monitor supports
formats.
The monitor automatically identifies various types
of input signal formats. (optional component input:
set on MENU)
・480i/59.94 (NTSC) ・1035i/60, 59.94
・575i/50 (PAL-B)
・480p/59.94 (*1)
・1080psF/30
・1080psF/25
・1080psF/24, 23.98 ・720p/30, 29.97
・1080p/60, 59.94
・1080p/50
・1080p/30, 29.97
・1080p/25
・1080p/24, 23.98
(*1) RGB/YPbPr input only
(*2) SDI input only
various broadcasting
・1080i/60, 59.94
・1080i/50
・720p/60, 59.94
・720p/50
・720p/24, 23.98 (*2)
・720p/25
(3) Diverse input sources
The monitor is standard equipped with two SDI
signal (compatible with both HD/SD 4:2:2) inputs and
two analog composite signal inputs. It also comes
standard with one DVI-D signal input (VGA/SVGA/
XGA/WXGA/SXGA/UXGA/WUXGA).
The multi-SDI input (*) compatible with 3G-SDI
(single), analog PC input and RGB/YPbPr inputs are
optionally available.
(4) Compatibility with embedded audio
Standard equipped with an embedded audio
feature, the embedded audio signals multiplexed with
HD-SDI signal or SD-SDI (4:2:2) signal can be
automatically recognized and the audio output can be
heard through the built-in stereo speakers or stereo
headphones. The monitor also has a standard
embedded audio level meter display on the screen.
Using an optional device, the embedded audio
signal may be handled as an analog output (when the
EA-240A is mounted) or as an AES/EBU output
(when the EA-240D is mounted).
Besides, the optional 3G-SDI (single) multi-SDI
module comes in two types: Embedded analog audio
output type (D3G-240A) and AES/EBU output type
(D3G-240D).
(5) Remote control functions
The monitor can be remote-controlled with the use
of four remote control functions. Depending on the
place of installation and type of operation, the
parallel, serial or wireless mode can be used.
In addition to the conventional parallel remote
control (pin assignment by user is possible), the
monitor also comes standard with a serial remote
input interface that enables remote control with just
one BNC coaxial cable.
Up to 99 monitors can be remote-controlled
individually or concurrently using an optional serial
remote controller SRC-301A/Z simply with Ikagami's
various monitors being loop-through connected.
An infrared wireless remote controller RCT-30A is
also optionally available.
The RS-485 input/output terminals are also
standard designed for control of up to 32 units.
(6) Built-in markers
4:3 (16:9 mode), 13:9, 14:9, 15:9, 16:9 (4:3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode) line
markers can be displayed.
- 1 -