Table of Contents
Advertisement
4-12．Description of MENU 9 Functions
ＭＥＮＵ９（ＰＣ ＳＥＴＵＰ）
１．ＤＶＩ ＳＥＴＵＰ
２．→ＥＸＰＡＮＳＩＯＮ
３．ＣＯＭＰ ＳＥＴＵＰ
４．→ＩＮＰＵＴ ＳＥＬＥＣＴ
５．→ＥＸＰＡＮＳＩＯＮ
６．→ＸＧＡ／ＷＸＧＡ
７．ＡＵＴＯ ＡＤＪＵＳＴ
８．→Ｈ ＰＯＳＩＴＩＯＮ
９．→Ｖ ＰＯＳＩＴＩＯＮ
10．→ＣＬＯＣＫ
11．→ＰＨＡＳＥ
ＳＥＴ→ ＥＸＩＴ→
ＥＮＴ
* The settings on MENU9 can be made only when the PC input is selected.
* When the computer screen resolution is set at WXGA, SXGA, UXGA and WUXGA, be sure to select the
refresh frequency of 60 Hz.
① Setting the display mode with DVI input (PC format)
・Used to preset the image display size in receiving
the PC-format DVI signals. This is effective
when a DVI input mode has been selected and
the related signal is detected.
： Images are displayed 1 : 1 with
・REAL
the resolution of input signal.
・NORMAL ： The aspect ratio is maintained.
Images are displayed enlarged up to
maximum size displayable on this
panel. Accordingly, the display size
is not different between REAL and
NORMAL with UXGA/WUXGA
input signals.
： Images are fully displayed
・FULL
onscreen (1920 x 1200) for all
input signals. Accordingly, the full
display is made with different
aspect ratios except for WUXGA
(16 : 10) input signals.
・Default setting is NORMAL.
◆Display pixels with respect to PC input signals
in each mode
PC input signal
Pixel size and aspect ratio
(pixels, aspect ratio)
REAL
VGA
640×480
(640×480、4:3)
SVGA
800×600
(800×600、4:3)
XGA
1024×768
(1024×768、4:3)
WXGA
1280×768
(1280×768、15:9)
(15:9)
SXGA
1280×1024
(1280×1024、5:4)
UXGA
1600×1200
(1600×1200、4:3)
WUXGA
1920×1200
(1920×1200、16:10)
(16:10)
ＮＯＲＭＡＬ
ＶＩＤＥＯ
ＮＯＲＭＡＬ
ＸＧＡ
ＥＸＥＣＵＴＥ
０
０
０
０
E S C
NORMAL
1600×1200
1920×1200
(4:3)
(4:3)
1600×1200
1920×1200
(4:3)
(4:3)
1600×1200
1920×1200
(4:3)
(4:3)
1920×1152
1920×1200
(15:9)
1500×1200
1920×1200
(5:4)
(5:4)
1600×1200
1920×1200
(4:3)
(4:3)
1920×1200
1920×1200
(16:10)
① Setting the display mode with DVI input (PC format)
② Switching between analog PC and COMPONENT input signals (Settings only for the CM-175)
③ Setting the display mode with analog PC input (Settings only for the CM-175)
④ Selecting the analog PC input XGA /WXGA (Settings only for the CM-175)
⑤ Executing the automatic adjustment of PC input (Only for the DVI(PC) and CM-175)
⑥ Adjusting the horizontal onscreen position with PC input (Only for the DVI(PC) and CM-175)
⑦ Adjusting the vertical onscreen position with PC input (Only for the DVI(PC) and CM-175)
⑧ Adjusting the clock with analog PC input (Settings only for the CM-175)
⑨ Adjusting the phase with analog PC input (Settings only for the CM-175)
② Switching between analog PC and COMPONENT
input signals (Settings only for the CM-175)
・PC
・VIDEO ：COMPONENT input of the CM-175 is
・This function can be assigned with the F1
switchon the front panel.
・Default setting is VIDEO.
③ Setting the display mode with analog PC input
(Settings only for the CM-175)
・Used to preset the image display size. The table
below Item ① is also applicable with the display
pixel size with respect to the input signal mode.
・REAL
・NORMAL ：Images are displayed with the
・FULL
FULL
(16:10)
・Default setting is NORMAL.
(16:10)
(16:10)
④ Selecting the analog PC input XGA/WXGA
(16:10)
(Settings only for the CM-175)
(16:10)
・When the analog PC input signal is WXGA, the
(16:10)
format may fail to be identified, depending on
the signal timing. In such case, select WXGA.
(16:10)
- -
31
：Analog PC input of the CM-175 is
selected.
selected.
：Images are displayed with the
resolution of input signal.
resolution enhanced to 1600 x
1200 in the case of VGA, SVGA,
XGA and SXGA input signals.
：Images are fully displayed onscreen
(1920 x 1200). With the WUXGA
input signals, the display size
remains FULL in any settings.
F2
Advertisement
Table of Contents
