Data 3 Parallel Remote Pin Function - Ikegami HLM-2450WB Operation Manual

Data 3 Parallel Remote Pin Function

Connector Face View on Rear Panel
1
10
5
<Connector on system side>
D-Sub 15-pin (male) mini-type
* Connector
CD0115PA100:
* Case
DE-C8-J9-F2-1:
Japan Aviation Electronics Industry-made
※ The above parts or equivalents are
supplied as standard.
■ Pin functions by default
Pin No. Function
1 GND
2 CH-B on
3 NC
4 G TALLY on
5 COMP. on
6 NC
7 MONO on
8 RGB on
9 EXT-SYNC on
10 16:9 on
11 DVI on
12 MARKER on
13 SHADOW on
14 R TALLY on
15 Multi-SDI on
Wiring of Remote Connector (by default)
6
11
15
CVILUX-made
Connecting remote terminals to this pin enables ON control.
Connect to Pin 1 to select B channel in the analog composite or Multi-SDI input mode.
* When Pin 2 is OPEN, the A channel will be selected.
No connection
Connect to Pin 1 to set G TALLY to ON.
Connect to Pin 1 to select the COMP. input with the CM-175 mounted.
* When Pins 5, 11 and 15 are all open, the analog composite will be selected.
No connection
Connect to Pin 1 to switch the COLOR/MONO setting to MONO.
In COMP input selection, connect this pin to No.1 pin for switching the mode to RGB.
Connect to Pin 1 to switch the sync mode of the analog input to the external sync
(EXT SYNC) with the CM-175 mounted.
Connect to Pin 1 to change the aspect (4:3/16:9) of SDTV signals to 16:9.
* If the setting is to be controlled simultaneously with channel switching, set [CHANGE
ASPE] to [MANUAL] in MENU 2-3.
Connect to Pin 1 to select the DVI input mode.
* When Pins 5, 11 and 15 are all open, the analog composite will be selected.
Connect to Pin 1 to set MARKER to ON.
Connect to Pin 1 to set SHADOW to ON.
* The shadow is displayed in the MENU7-preset level.
Connect to Pin 1 to set Red TALLY to ON.
Connect to Pin 1 to select the Multi-SDI input module.
Use together with Pin 2 to switch between channels A and B.
* When Pins 5, 11 and 15 are all open, the analog composite will be selected.
GND 1
CH-B on 2
NC 3
G TALLY on 4
COMP. on 5
NC 6
MONO on 7
RGB on 8
EXT-SYNC on 9
16:9 on 10
DVI on 11
MARKER on 12
SHADOW on 13
R TALLY on 14
Multi-SDI on 15
External Assignment for Function
- 53 -