Table of Contents
Advertisement
⑩ F1 switch
・ Press this switch to select an item preset on the
menu.
・ For presettable items, refer to "4-4. Description on
MENU 2 Functions"
⑪ F2 switch
・ Press this switch to select an item preset on the
menu.
・ For presettable items, refer to "4-4. Description on
MENU 2 Functions".
⑫ MONO switch
・ Press this switch to display color signals in black
and white.
※ This function is disabled in the component RGB
input or PC input mode.
⑬ ASPECT switch
・ Use this switch to change image aspect ratios
(4:3/16:9/ZOOM).
・ Choose between memorizing the settings for each
channel and making the settings for all channels
on MENU2.
※ "ZOOM" magnifies the image area in the 4:3
letterbox.
<ZOOM>
※ SDTV
format
signals
effective.
※ In the PC input mode, this function is disabled.
⑭ SCAN switch
・ Press this switch to change image display sizes
(normal-scan/under-scan).
※ In the PC input mode, this function is disabled.
<16:9 Nomal-scan>
1920 x 1080 pixel display
<4:3 Nomal-scan>
1440 x 1080 pixel display
(480i/575i)
only
are
<16:9 Under-scan>
95% pixel in Normal-scan
<4:3 Under-scan>
95% pixel in Normal-scan
⑮ APT switch
・Press this switch to select the aperture.
・Set a correction amount on PRESET MENU.
※ In the PC input mode, this function is disabled.
⑯ SCREEN switch
・Press this switch to display images in R, G or B
individually.
・ The switching between colors takes place as
follows each time this switch is pressed.
"R only" → "G only" → "B only" → "Normal
Screen"
※ In the PC input mode, this function is disabled.
⑰ MARK switch
・ Press this switch to turn on/off markers.
・ To change icons, use the
Detailed settings are made on MENU 7.
※ This function is disabled when an internal test
signal is displayed or in the PC input mode.
⑱ CHROMA manual control
・ This control serves as a manual/preset switch for
chroma or a manual data variable control.
・ The control pops out when it is pressed and the
mode is changed to MANUAL.
⑲ BRIGHT manual control
・ This control serves as a manual/preset switch for
brightness or a manual data variable control.
・ The control pops out when it is pressed and the
mode is changed to MANUAL.
CONT manual control
20
・ This control serves as a manual/preset switch for
contrast or a manual data variable control.
・ The control pops out when it is pressed and the
mode is changed to MANUAL.
・This control can be an allocation to BACKLIGHT
according to the NENU setting.
AUDIO control
21
・ Use this control to adjust the sound volume of the
front speaker or the headphones.
※ An
audio
(analog/embedded
outputted to the speaker must be set on MENU6.
SDI ERROR indicator
22
・This LED alarm indicator will light up in red in
SDI signal transmission error (CRC, TRS, check
sum, line number).
- 4 -
and
switches.
audio)
to
be
Advertisement
Table of Contents
