Rear Panel (Left Bottom) - Ikegami HLM-2450WB Operation Manual

If the indicator lights up, check the details on a
waveform monitor or the like.
・By turning this setting to MENU2, the monitor
can be set so that the front SDI ERROR LED will
not be forcefully turned ON even when an SDI
ERROR has occurred.
23
Infrared receiver of wireless remote control
・ When a wireless remote controller (RCT-20A/
RCT-30A) is used, point it towards this receiver.
Stereo headphones output (stereo mini-jack type)
24
・ Analog audio signals or embedded audio signals
are fed out of this terminal.
・ The analog and embedded inputs can be selected
on MENU6.
2-2．Rear panel (left bottom)
②
③
① MAIN POWER switch
・ Turns on/off the AC power supply to the
monitor.
・ To operate the monitor, turn ON this MAIN
POWER switch as well as the POWER switch
on the front panel.
USB terminal
25
・ Connect a USB memory, and the monitor's data
can be saved on the USB memory or the data on
the USB memory can be downloaded on another
monitor.
・ Connect a USB mouse, and the user markers can
be drawn.
26
Stereo speakers
・ Analog audio signals or embedded audio signals
are fed out of this terminal.
・ The analog and embedded inputs can be selected
on MENU6.
・ With the headphones being connected, no sound is
heard from the speakers.
AC IN
100-120V
200-240V
② AC power input
・ Insert the provided AC cable here to supply AC
power.
③ Lock
・ After inserting the AC plug, lock the AC plug with
this lock to prevent it from disconnecting.
- 5 -
POWER
①