Display Of Preset Data List; Copying Of File Data; Setting Of File Change Operation At The Time Of Channel Change; Password - Ikegami HLM-2450WB Operation Manual

③ Display of preset data list

（ＰＲＥＳＥＴ ＤＡＴＡ ＳＴＡＴＵＳ）
ＳＥＬＥＣＴ ＦＩＬＥ Ｄ６５
１.ＨＵＥ ０
２.ＣＨＲＯＭＡ ０
３.ＢＲＩＧＨＴ ０
４.ＣＯＮＴＲＡＳＴ ０
５.Ｒ．ＢＫＧ ０
６.Ｇ．ＢＫＧ ０
７.Ｂ．ＢＫＧ ０
８.Ｒ．ＧＡＩＮ ０
９.Ｇ．ＧＡＩＮ ０
10.Ｂ．ＧＡＩＮ ０
11.ＡＰＴ ＬＥＶＥＬ １６
12.ＡＰＴ ＦＲＥＱ． ＨＩＧＨ
ＥＸＩＴ→
E S C
・Display a list of the settings of file data.
・To change files, use the
SELECT FILE setting.

④ Copying of file data

（ＣＯＰＹ ＦＩＬＥ）
ＦＲＯＭ ： Ｄ ６５
↓
ＴＯ ： ＦＩＬＥ １
ＳＥＴ→ ＥＸＩＴ→
ＥＮＴ E S C
(a) Select the copy source file (D65, D93, FILEx [x: 1
to 8]) using the ▲/▼ switch and press the ENT
switch.
(b) Select the copy destination file (FILEx [x: 1 to 8],
FILE1 - FILE8) using the ▲/▼ switch.
* When FILE1 - FILE8 are selected, data is
copied to FILE1 through FILE8.
(c)When the ENT switch is pressed, the copy
confirmation message appears. To copy, press
the ENT switch again. If not, press the ESC
switch.
⑤ Setting of file change operation at the time of
channel change
・Set the association of channel change with file
change.
：Files are memorized for each
・AUTO
channel: When a channel is changed
to another, an automatically stored
fillies picked up.
・MANUAL：Just one file preset for all channels is
fixed.
・Default setting is AUTO.
(a) 選択しているファイル
(a) File being selected
(b) HUE データ
(b) HUE data
(c) CHROMA データ
(c) CHROMA data
(d) BRIGHTNESS データ
(d) BRIGHT data
(e) CONTRAST データ
(e) CONTRAST data
(f) R. BACKGROUND data
(f) R. BACKGROUNDデータ
(g) G. BACKGROUND data
(g) G. BACKGROUNDデータ
(h) B. BACKGROUND data
(h) B. BACKGROUNDデータ
(i) R.GAIN data
(i) R. GAINデータ
(j) G.GAIN data
(j) G. GAINデータ
(k) B.GAIN data
(k) B. GAINデータ
(m) Aperture level
(l アパーチャーレベル
(n) Aperture frequency
(m) アパーチャー補正周波数
and switches at the
(a) Selection of copy source
(a) コピー元ファイルの選択
file
(b) Selection of copy
(b) コピー先ファイルの選択
destination file
⑥ Setting of data protection password
・A password is set to prevent modifications of the
preset data and the initialization.
（ＬＯＣＫ ＦＩＬＥ／ＤＡＴＡ）
ＳＴＡＴＵＳ：ＵＮＬＯＣＫ
－ＥＮＴＥＲ ＰＡＳＳＷＯＲＤ－
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ
１２３４５６７８９
ＰＡＳＳＷＯＲＤ ＊＊＊＊
ＳＥＴ→ ＥＸＩＴ→
ＥＮＴ
（ＬＯＣＫ ＦＩＬＥ／ＤＡＴＡ）
ＳＴＡＴＵＳ：ＵＮＬＯＣＫ
－ＥＮＴＥＲ ＰＡＳＳＷＯＲＤ－
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ
１２３４５６７８９
ＰＡＳＳＷＯＲＤ ＡＢＣＤ
ＭＯＤＥ ＡＬＬ ＬＯＣＫ
ＳＥＴ→ ＣＡＮＣＥＬ→
ＥＮＴ
(a) Display of currently set lock mode
・The currently set lock mode is displayed.
・UNLOCK
・DATA LOCK：Preset data change is locked,
・ALL LOCK
(b) Password menu
・Select characters from this list using the ▲, ▼,
and switches and press the ENT switch to
set the password.
(c) Password entry
・When setting the lock mode to ALL LOCK or
DATA LOCK
mode(UNLOCK), select characters from the menu
in ② and enter a four-digit password here.
* If you forget the registered password, contact
Ikegami's
password for releasing the lock.
(d) Setting of LOCK mode
・ When the ENT switch is pressed after the
password has been entered, the LOCK mode
blinks. Execute the setting by pressing the ENT
key. To return to the previous state, press the
ESC switch.
- 40 -
(a) 現在設定されている
(a) Display of currently set
ロックモードの表示 lock mode
(b) Password menu (b) パスワードメニュー
E S C
(c) Password entry
(c) パスワード入力
(d) ロックモードの設定
(d) Setting of lock mode
E S C
： The lock is released and all data
can be changed.
although file change
impossible.
： Preset data change and file
change are impossible.
or when releasing
service office. They
the lock
have a