Ikegami HLM-2450WB Operation Manual page 55

V: 0.714Vp-p (NTSC)/0.7Vp-p (PAL),
Positive polarity
d) Input impedance
High impedance bridge connection or 75Ω
termination
(75Ω termination plug is optional.)
(4) External sync signal
(when the optional CM-175 is mounted)
Analog component input
a) Input terminal
BNC 1 line (Loop through)
b) Input level
0.3 to 4 Vp-p, three values in positive and
negative polarities, two values in negative
polarity
c) Input impedance
High impedance bridge connection or 75Ω
termination
(75Ω termination plug is optional.)
(5) Analog component (RGB/YPbPr) signal
(when the optional CM-175 is mounted)
a) Input terminal
BNC 1 line (single end)
b) Input signal format
・HDTV
1035i/60,59.94
1080i/60,59.94
1080i/50
1080psF/30,29.97
1080psF/25
1080psF/24,23.98
1080p/60,59.94
1080p/50
1080p/30,29.97
1080p/25
1080p/24,23.98
720p/60,59.94
720p/50
720p/30,29.97
720p/25
・SDTV
480i/59.94
575i/50
480p/59.94
c) Input level
Y/GBR: 0.7Vp-p (except SYNC),
Positive polarity
Pb, Pr: ±0.35Vp-p, Positive polarity
SYNC: ±0.3Vp-p (SYNC on Y/G)
d) Input impedance
75Ω termination
SMPTE 240M
SMPTE 274M
SMPTE 274M
SMPTE RP211
SMPTE RP211
SMPTE RP211
SMPTE 274M
SMPTE 274M
SMPTE 274M
SMPTE 274M
SMPTE 274M
SMPTE 296M
SMPTE 296M
SMPTE 296M
SMPTE 296M
SMPTE 253M
EBU N10
SMPTE 293M
- 45 -
(6) DVI-D and Analog PC signal
(Analog when the optional CM-175 is mounted)
*DVI-D supported as standard
a) Input terminal
ANALOG: HD D-SUB 15-pin (female) 1 line
(when
mounted)
DIGITAL: DVI-D single link 24-pin (female)
1 line (supported as standard)
b) Input signal format
・DVI-D (VIDEO)
1080i/60,59.94
1080i/50
1080psF/30,29.97
1080psF/25
1080psF/24,23.98
1080p/60,59.94
1080p/50
1080p/30,29.97
1080p/25
1080p/24,23.98
480i/59.94
575i/50
・DVI-D(PC), Analog PC signal format
→Refer to "Data 1 PC Input Signal
Compatible Format".
c) Input level
Analog RGB: 700mVp-p, Positive polarity
DVI-D: TMDS
d) Input impedance
Analog RGB
：75Ω
DVI-D
：50Ω
(7) Embedded audio specification
(supported as standard)
(when the optional D3G-240A/D is mounted)
a) Input signal format
・SMPTE 299M
1035i/60,59.94
1080i/60,59.94
1080i/50
1080psF/30,29.97
1080psF/25
1080psF/24,23.98
1080p/30,29.97
1080p/60,59.94(*)
(*)：only the optional D3G-240A/D
・SMPTE 272M
480i/59.94 (4:2:2)
b) Format detection
Auto detection
c) Sampling frequency
48kHz (Synchronized with video clock)
d) Embedded audio output
The audio on each of paired channels downmix,
ch1/2, ch3/4, ch5/6 and ch7/8 is output through
the built-in stereo speaker, the headphone and
analog audio output.
the optional CM-175
720p/60,59.94
720p/50
720p/30,29.97
720p/25
720p/24,23.98
480p/59.94
1080p/25
1080p/24,23.98
720p/60,59.94
720p/50
720p/30,29.97
720p/25
720p/24,23.98
1080p/50(*)
575i/50 (4:2:2)
is