Ikegami HLM-2450WB Operation Manual page 64

■ Additional user-set functions
Pin No. Function
User setting SHADOW0 on
User setting SHADOW20 on
User setting SHADOW40 on
User setting SHADOW60 on
User setting ANALOG PC on
User setting 3G-SDI on
* The functions of pins other than 1 are freely user-settable on MENU.
Setting of two shadow levels and behavior
The shadow levels can be very quickly switched each other. To do this, make the user setting to assign the
parallel-remote pin functions to "SHADOW0", "SHADOW20", "SHADOW40", "SHADOW60", etc.
Typical setting procedure and behavior are shown below.
■ Setting procedure
MENU8 (Parallel Remote)
1. Pin Function
P2：CH-B
P3：(blank)
P4：G-TALLY
P5：COMP.
P6：(blank)
P7：MONO
P8：RGB
③
①First press the "MENU" switch and make the "MENU8" screen appear.
②Move the cursor to "DEFAULT" and enter "USER" instead.
③Move the cursor to "P6: (blank)" and enter "P6: SHADOW0" (black) instead.
④Move the cursor to "P13: SHADOW" and enter "P13: SHADOW40" instead.
* In the above setting, priority is given to Pin 6 if Pins 6 and 13 are pressed at once.
■ Behavior
MARKER
Item
Terminal (12)
"ON"
1
"ON"
2
"ON"
3
"ON"
4
5 OFF
6 OFF
7 OFF
* The types of markers displayed are those set on "MENU".
Connect to Pin 1 for running with the shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at once.
Connect to Pin 1 for running with the shadow level 20%.
Connect to Pin 1 for running with the shadow level 40%.
Connect to Pin 1 for running with the shadow level 60%.
Connect to Pin 1 for selecting the ANALOG PC input with CM-175 mounted.
* When all the input select pins are open, the analog composite signal is selected.
Connect to Pin 1 for selecting the 3G-SDI input with D3G-240A/D mounted.
* When all the input select pins are open, the analog composite signal is selected.
②
DEFAULT
P9 ：EXT SYNC
P10：16:9
P11：DVI
P12：MARKER
P13：SHADOW
P14：R-TALLY
P15：SDI
SHADOW(40%)
Terminal (13)
OFF OFF
"ON"
OFF
"ON"
OFF
"ON" "ON"
"ON"
OFF
"ON"
OFF
"ON" "ON"
External Assignment for Function
①
MENU8 (Parallel Remote)
1. Pin Function
P2：CH-B
P3：(blank)
P4：G-TALLY
P5：COMP.
P6：SHADOW 0
P7：MONO
P8：RGB
④
SHADOW(0%)
Terminal (6)
MARKER ON
MARKER＋SHADOW(40%) ON
MARKER＋SHADOW(0%) ON
MARKER＋SHADOW(0%) ON *Priority to 0%
SHADOW(40%) ON
SHADOW(0%) ON
SHADOW(0%) ON *Priority to 0%
- 54 -
USER
P9 ：EXT SYNC
P10：16:9
P11：DVI
P12：MARKER
P13：SHADOW40
P14：R-TALLY
P15：SDI
Behavior