Measuring Timing Events - Fourier MultiLogPRO User Manual

The Cursor
Use the Cursor in Graphic Display mode to read data values or to zoom in to
the area around a selected point. The cursor is displayed automatically after
logging has ended, or when opening a stored recording.
1. Use the Forward
move the cursor.
2. MultiLogPRO displays the point coordinates at the bottom of the
graph.
3. If there is more then one sensor, press the Enter button
move the cursor to another plot on the graph.
Zooming
Position the cursor in the area you want to zoom into.
1. Press the two arrow buttons,
You will zoom in around the cursor in a 2:1 ratio.
2. Press the Escape button

6.2.6 Measuring Timing Events

MultiLogPRO incorporates an accurate Timer module with resolution of 0.1ms.
The timer can measure several types of events triggered by Fourier Systems'
photogates:
 Time and speed with one photogate
 Time and speed between two gates
 Time, speed and acceleration between two gates
 Stopwatch
While in Timer mode MultiLogPRO does not store data.
70 MultiLogPRO
and Backward
and
to zoom out.
arrow buttons to
to
, simultaneously.