Start Recording; Stop Recording; Saving Data - Fourier MultiLogPRO User Manual

2. Make sure that WeatherLab is in running and that the Weather
Station is connected to the computer.
3. Click File on the menu bar, and then click Weather Station
settings.
4. Check the Set north direction check box, and then click OK.
5. Click Logger on the menu bar, and then click Run.
WeatherLab begins data collection and sets the current wind
direction to north.
6. Remove the masking tape from the wind pane.

5.3.3 Start Recording

Click Logger on the menu bar, and then click Run.
Note: Running MultiLogPRO from WeatherLab is available only in
cable connection. If you are operating the Weather Station in wireless
connection you must run MultiLogPRO from its keypad.

5.3.4 Stop Recording

Click Logger on the menu bar, and then click Stop.
Note: Stopping MultiLogPRO from WeatherLab is available only in
cable connection, if you are operating the Weather Station in wireless
connection you must stop MultiLogPRO from its keypad

5.3.5 Saving Data

Continuous mode
There is no need to save data manually as the data is saved automatically
every saving time interval in the station archive folder. The default folder
location is: C:\Program Files\Fourier Systems\WeatherLab\Station archive
WeatherLab creates a new data file every 24 hours at midnight.
WeatherLab 33