Fourier MultiLogPRO User Manual page 56

At the bottom of the column, the total heating degree-days accumulated during
the month is displayed.
 Cool Deg Days: The number of cooling degree-days accumulated on
each day
At the bottom of the column, the total cooling degree-days accumulated during
the month is displayed.
 Rain Fall: The rainfall accumulated on each day
At the bottom of the column, the total rainfall accumulated during the month is
displayed.
 Wind Speed
o Avg: The average wind speed for each day
At the bottom of the column, the average wind speed of the month is displayed.
o High: The maximal wind speed for the day
o Time: Time at which the maximal wind speed occurred
At the bottom of the columns, the highest wind speed recorded during the
month and the day on which it occurred are displayed.
 Dom Dir: The dominant wind direction for the day
At the bottom of the column, the dominant wind direction recorded during the
month is displayed.
At the bottom of the report, the following monthly information about temperature
and rainfall levels is summarized (the levels can be changed by the user via the
report settings dialog):
 Max >= 90
The number of days on which high temperature was 90° F (32.2°C) or above
 Max <= 32
The number of days on which high temperature was 32° F (0°C) or below
 Min <= 32
The number of days on which low temperature was 32° F (0°C) or below
 Min <= 0
The number of days on which low temperature was 0° F (-17.8°C) or below.
 Max Rainfall
The maximum rainfall on any single day during the month
50 WeatherLab