Fourier MultiLogPRO User Manual page 70

The arrow indicates that MultiLogPRO is ready to accept a new sampling rate.
If the MultiLogPRO is in 8 input mode you have to select the sensors manually
(see page 70).
3. Select Rate
Use the Forward
desired rate, and then press the Enter button
Input – 1
Input – 2
Input – 3
Input – 4

MultiLogPRO automatically switches to the next step in the setup process and
the arrow moves to the "samples" row.
4. Select total number of samples
Use the Forward
number of samples, and then press the Enter button
Input – 1
Input – 2
Input – 3
Input – 4

64 MultiLogPRO
and Backward
Microphone
Light
RATE = Every sec
SAMPLES = 500
DISPLAY = numeric
and Backward
Microphone
Light
RATE = Every sec
SAMPLES = 200
DISPLAY = numeric
arrow buttons to select the
.
arrow buttons to select the
.