Setup The Weather Station - Fourier MultiLogPRO User Manual

2. Enter station information: Name, location, longitude, latitude and
altitude in the corresponding boxes
3. Select rain season starting month in the Rain season starts on drop
list. The yearly rainfall total will be calculated from the first day of
the month selected
4. To calibrate the wind direction sensor to the north for the next time
you run the station, check the Set north direction check box
5. Click OK

5.3.7 Setup the Weather Station

Use the Setup dialog to select operating mode, recording rate and saving
interval. For more advanced settings see Customize your Weather Station
Stand-alone experiment mode
1. After logging ends connect the MultiLogPRO to the computer.
2. Click Logger on the menu bar, and then click Download.
WeatherLab 35